Mirage LXF-3 Electronic Crossover System with Patent image create in HIGH WYCOMBE, Western Australia for sale

Excellent very clean path allowing positive control of your HP and LP crossover needs and the excellent patented create and channel image control. I have had this since new when it sold in Australia for $1800.
Because of the price these where very rare. Part of my down sizing, moving and clearing out instead putting into storage.
Mirage LFX-3 High Definition Electronic Crossover: Three channel active crossover; crossover frequencies - 50, 60, 80, 100 Hz; low pass 24 dB/octave; high pass 12 dB/octave.
Can also be used for 2-channel stereo (left and right) or mono for use with a center channel. The crossover is fed by the L,C,R (Left, Center, Right) line level output signals from an A/V processor or stereo preamp. High pass filtered signals from the crossover are fed to the L,C,R power amplifiers. The crossover is capable of driving 1 subwoofer-summed L,C,R low pass; 2 subwoofers-L+1/2C and R+1/2C low pass; or 3 subwoofers-L,C,R low pass.
The center channel has selectors for the crossover frequency, the low pass shape, high pass shape (fine tunes the slope), image (blends real and phantom information with the rest of the system speakers and subwoofers), and level (for adjusting center channel level compared to right/left). A second set of selectors controls the left/right subwoofer channels, and has the crossover frequency as well as low pass - high pass shape controls (independent of the center channel controls).
A master level control allows setting the subwoofer output for all three channels at once. Besides the on/off/bypass toggle, there is a toggle for 1,2, or 3 subwoofers (sums all three when set to 1), and a 180 degree phase toggle.
The LFX-3 has three line level RCA jack inputs (Left, Center, Right), three line level RCA jack outputs for high pass to the amplifiers for speakers which will be handling the mid-range and highs, and three line level RCA jack low pass outputs which can feed up to three separate powered subwoofers.
The LFX-3 is an external crossover with a twist. Not only will it allow you to blend three front channels (instead of the usual two) with one, two or even three subwoofers, but it will also allow you to mix the center-channel signal into the left and right channels. Patented phantom/real image system allows the option of having a real center-channel signal, phantom center-channel signal or anything in between.
Simple, but effective, it generates a hybrid center channel acoustic image. In the phantom position the center channel is turned off. Conversely in the real position there is only the hard real center signal. You can generate an image that is a combination of x percent real center and y percent of phantom center. And by doing that you can eliminate the